APG 40

PRODOTTI : PSI Alternatore: ECP 32-1S/4 C Sistema Controllo: DSE 6120
introduzione

Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.

Caratteristiche Generali
Nome del Modello APG 40
Frequenza (Hz) 50
Tipo di carburante Natural Gas
Motore Made e Modello PSI - 4.3L (4X)_ APG40
Il Modello Mecc Alte - ECP 32-1S/4 C
Sistema Controllo DSE 6120
Cabina AUL3
3 Fase, 50 Hz, PF 0,8
Tensione (AC) Potenza Standby (ESP) Potenza Primaria (PRP) Standby Amper
kVA kW kVA kW
400/231 40 32.00 37 29.60 57.74
Potenza Standby (ESP) : In caso di interruzione delle risorse di rete affidabile, viene utilizzato per alimentare il carico elettrico alternativo. ESP, è compatibile con ISO8528. Non è consentito per sovraccarico.

Potenza Primaria (PRP) : Viene utilizzato per ore illimitate annuale, per alimentare il carico elettrico alternativo. PRP, è compatibile con ISO 8525. Secondo la norma ISO 3046, nel periodo di lavoro di 12 ore, viene utilizzato per il sovraccarico di 10% per un ora.
Specifiche del Motore
Motore PSI
Modello del motore 4.3L (4X)_ APG40
Numero e Dispozione Cilindri 6 cylinders - V type
Alesaggio x Corsa mm 101,6 (4) X 88 (3,5)
Cilindrata L 4,3 (262)
Aspirazione Naturally Aspirated
Rapporto Compressione 9.8:1
Velocità nominale (rpm) d/dk 1500
Capacità olio (lt) L 4,3 (1,1)
Potenza Standby (kW/HP) 48,2 (64,7)
Prime Potenza (kW/HP) 43,4 (58,2)
Block Heater QTY
1
Block Heater Power (Watt)
500
Tipo di carburante
Natural Gas
Injection Type and System
Spark-Ignited
Type of Fuel Pump
-
Governor System
ECU
Tensione di funzionamento (Vdc)
12 Vdc
Battery and Capacity (Qty/Ah)
1 / 55
Cooling Method
Water Cooled
Coolant Capacity
7,3 (1,93)
Filtro dell'aria
Dry Type
Fuel Cons. Prime With %100 Load (m3/hr)
11,3 (8,1) (standby)
Specifiche del Motore
Manufacturer Mecc Alte
Il Modello ECP 32-1S/4 C
Frequenza (Hz) Hz 50
energia (kVA) kVA 37.5
Design   4 Pole
Tensione (AC) V 400
Fase 3
Il Regolatore Automatico di Tensione DSR
La Regolazione della Tensione (+/-) 1
isolamento sistema H
Protezione IP23/IP44
Fattore di potenza 0,8
Il Peso Completo del Generatore (Kg) 153
L'Aria di Raffreddamento m3 15.7
Dimensioni e peso
Tipo aperto Peso a secco (Kg)
(kg.)
Lunghezza (mm)
(mm.)
Larghezza (mm)
(mm.)
Altezza (mm)
(mm.)
Capacità Serbatoio (L) (Lt.)
Cabina Peso a secco (Kg)
(kg.)
Lunghezza (mm)
(mm.)
Larghezza (mm)
(mm.)
Altezza (mm)
(mm.)
Capacità Serbatoio (L) (Lt.)
AUL3
2274 (90) 1062 (42) 1307 (52)
Specifiche Standard

- Water cooled, gas engine

- Radiator with mechanical fan

- Protective grille for rotating and hot parts

- Electric starter and charge alternator

- Starting battery (with lead acid) including rack and cables

- Engine coolant heater

- Base frame design incorporates an anti-vibration isolators

- Flexible fuel connection hoses

- Single bearing, class H alternator

- Industrial exhaust silencer and steel bellows supplied separately(for open sets)

- Static battery charger

- Manual for application and installation

Sistema Controllo: DSE 6120
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
1. Menu navigation buttons 
2. Close mains button 
3. Main Status and instrumentation display 
4. Alarm LED's 
5. Close generator button 
6. Status LED's 
7. Operation selecting buttons
Dispositivi

DSE model 6120, Auto Mains Failure control module, Static battery charger input 198-264 volt, output 27,6V 5A (24V) or

13,8 Volt 5A (12V), fuses for control circuits. This Control Module is suitable for a wide variety of single gen-set applications

COSTRUZIONE E COMPLETAMENTO

Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion corrosion-resistant surface. Polyester composite powder topcoat forms a high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.

Installazione

Control panel is mounted on baseframe with steel stand. Located at the right side of the generator set (When you look at the Gen.Set. from Alternator side)

UNITÀ DI CONTROLLO GENERATORE

- The DSE 6120 module has been designed to monitor generator frequency, volt, current, engine oil pressure, coolant

temperature running hours and battery volts.

- Module monitors the mains supply and control the switch over to the generator when the mains power fails.

- The DSE6120 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving

true first up fault condition of Gen. Set failure.The LCD display indicates the fault.


Instruments
ENGINE
●Engine speed.
●Oil pressure.
●Coolant temperature.
●Run time.
●Battery volts.
●Configurable timing.

GENERATOR
●Voltage (L-L, L-N).
●Current (L1-L2-L3).
●Frequency.
●Gen. Set ready.
●Gen. Set enabled.

MAINS
●Mains ready.
●Mains enabled.

Opzioni

- Flexible sensor can be controlled with temperature, pressure, percentage (warning/shutdown/electrical trip)

- Local setting parameters and monitoring from PC to control module with USB connection (max 6 mt).

Standard

- Electrical Safety / Electro Magenetic Compatibility (EMC)

- BS EN 60950 Electrical Safety

- BS EN 61000-6-2 EMC Generic Immunity Standard

- BS EN 61000-6-4 EMC Generic Emission Standard

Carica Batterie Statico

- Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.

- Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and

27,6 V for 24 V . Input 198 - 264 volt AC.

- The charger is fitted with a protection diode across the output.

- Connect charge fail relay coil between positive output and CF output.

- They are equipped with RFI filter to reduce electrical noise radiated from the device.

- Galvanically isolated input and output typically 4kV for high reliability.

Cabina: AUL3
Specifiche Standard


Modello Cabina AUL3
Larghezza (mm) mm. 1062 (42)
Lunghezza (mm) mm. 2274 (90)
Altezza (mm) mm. 1307 (52)
Capacità Serbatoio (L) Lt.