APG 33
Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.
| Model Name |
APG 33 |
||
|---|---|---|---|
| Frequency (Hz) |
50 |
||
| Fuel Type |
Natural Gas |
||
| Engine Made and Model |
PSI - 4.3L (4X)_ APG33 |
||
| Alternator Made and Model |
Mecc Alte - ECP 28-VL/4 C |
||
| Control Panel Model |
DSE 6120 |
||
| Canopy | AUL3 |
| VOLTAGE | STANDBY RATING (ESP) | PRIME RATING (PRP) | Standby Amper | ||
|---|---|---|---|---|---|
| kVA | kW | kVA | kW | ||
| 400/231 | 33 | 26.40 | 30 | 24.00 | 47.63 |
PRIME RATING (PRP) : Applicable for supplying power to varying electrical load for unlimited hours. PRP is in accordance with ISO 8528-1. 10 % overload capability is available for a period of 1 hour within 12-hour perod of operation.
| Engine |
PSI |
||
|---|---|---|---|
| Engine Model | 4.3L (4X)_ APG33 | ||
| NO. OF CYLINDERS AND BUILD | 6 cylinders - V type | ||
| BORE AND STROKE | mm | 101,6 (4) X 88 (3.5) | |
| TOTAL DISPLACEMENT | L | 4,3 (262) | |
| Aspiration | Naturally Aspirated | ||
| COMPRESSION RATIO | 9.8:1 | ||
| RATED SPEED (RPM) | d/dk | 1500 | |
| OIL CAPACITY | L | 4,3 (1,1) | |
| Standby Power (kW/HP) | 48,2 (64,7) | ||
| Prime Power | 43,4 (58,2) | ||
| Block Heater QTY | |||
| 1 | |||
| Block Heater Power (Watt) | |||
| 500 | |||
| Fuel Type | |||
| Natural Gas | |||
| Injection Type and System | |||
| Spark-Ignited | |||
| Type of Fuel Pump | |||
| - | |||
| Governor System | |||
| ECU | |||
| Operating Voltage (Vdc) | |||
| 12 Vdc | |||
| Battery and Capacity (Qty/Ah) | |||
| 1 / 55 | |||
| Cooling Method | |||
| Water Cooled | |||
| Coolant Capacity (engine only) (l) | |||
| 7,3 (1,93) | |||
| Air Filter | |||
| Dry Type | |||
| Fuel Cons. Prime With %100 Load (m3/hr) | |||
| 9,3 (6,7) (standby) | |||
| Manufacturer | Mecc Alte | |
|---|---|---|
| Alternator Made and Model | ECP 28-VL/4 C | |
| Frequency (Hz) | Hz | 50 |
| Power (kVA) | kVA | 30 |
| DESIGN | 4 Pole, Brushless | |
| VOLTAGE | V | 400 |
| Phase | 3 | |
| A.V.R. | DSR | |
| Voltage Regulation | (+/-) | 1 |
| Insulation System | H | |
| Protection | IP23 | |
| Rated Power Factor | 0.8 | |
| WEIGHT COMP. GENERATOR (Kg) | 141.8 | |
| COOLING AIR (m³/min) | m3 | 6.6 |
| Open Type | DRY WEIGHT (kg.) (kg.) |
LENGTH (mm.) |
WIDTH (mm.) |
HEIGHT (mm.) |
TANK CAPACITY (lt.) (Lt.) |
|---|---|---|---|---|---|
| 2278 (7,5) | 1063 (3,5) | 1404 (4,6) | |||
| CANOPY | DRY WEIGHT (kg.) (kg.) |
LENGTH (mm.) |
WIDTH (mm.) |
HEIGHT (mm.) |
TANK CAPACITY (lt.) (Lt.) |
AUL3
|
2274 (90) | 1062 (42) | 1307 (52) |
- Water cooled, gas engine
- Radiator with mechanical fan
- Protective grille for rotating and hot parts
- Electric starter and charge alternator
- Starting battery (with lead acid) including rack and cables
- Engine coolant heater
- Base frame design incorporates an anti-vibration isolators
- Flexible fuel connection hoses
- Single bearing, class H alternator
- Industrial exhaust silencer and steel bellows supplied separately(for open sets)
- Static battery charger
- Manual for application and installation
2. Close mains button
3. Main Status and instrumentation display
4. Alarm LED's
5. Close generator button
6. Status LED's
7. Operation selecting buttons
2. Close mains button
3. Main Status and instrumentation display
4. Alarm LED's
5. Close generator button
6. Status LED's
7. Operation selecting buttons
DSE model 6120, Auto Mains Failure control module, Static battery charger input 198-264 volt, output 27,6V 5A (24V) or
13,8 Volt 5A (12V), fuses for control circuits. This Control Module is suitable for a wide variety of single gen-set applications
Components installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion corrosion-resistant surface. Polyester composite powder topcoat forms a high gloss and extremely durable finish. Lockable and hinged panel door provides easy access to components.
Control panel is mounted on baseframe with steel stand. Located at the right side of the generator set (When you look at the Gen.Set. from Alternator side)
- The DSE 6120 module has been designed to monitor generator frequency, volt, current, engine oil pressure, coolant
temperature running hours and battery volts.
- Module monitors the mains supply and control the switch over to the generator when the mains power fails.
- The DSE6120 also indicates operational status and fault conditions, Automatically shutting down the Gen. Set and giving
true first up fault condition of Gen. Set failure.The LCD display indicates the fault.
ENGINE
●Engine speed.
●Oil pressure.
●Coolant temperature.
●Run time.
●Battery volts.
●Configurable timing.
GENERATOR
●Voltage (L-L, L-N).
●Current (L1-L2-L3).
●Frequency.
●Gen. Set ready.
●Gen. Set enabled.
MAINS
●Mains ready.
●Mains enabled.
- Flexible sensor can be controlled with temperature, pressure, percentage (warning/shutdown/electrical trip)
- Local setting parameters and monitoring from PC to control module with USB connection (max 6 mt).
- Electrical Safety / Electro Magenetic Compatibility (EMC)
- BS EN 60950 Electrical Safety
- BS EN 61000-6-2 EMC Generic Immunity Standard
- BS EN 61000-6-4 EMC Generic Emission Standard
- Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficiency.
- Battery charger models' output V-I characteristic is very close to square and output is 5 amper, 13,8 V for 12 volt and
27,6 V for 24 V . Input 198 - 264 volt AC.
- The charger is fitted with a protection diode across the output.
- Connect charge fail relay coil between positive output and CF output.
- They are equipped with RFI filter to reduce electrical noise radiated from the device.
- Galvanically isolated input and output typically 4kV for high reliability.
| CANOPY MODEL | AUL3 | |
|---|---|---|
| WIDTH | mm. | 1062 (42) |
| LENGTH | mm. | 2274 (90) |
| HEIGHT | mm. | 1307 (52) |
| TANK CAPACITY (lt.) | Lt. | |